New Hire Inventory
05/03/11 07:59 Filed in: Press & Media Release | Nexo PA Systems
We've recently added a large number of Nexo PS10R2 speakers to out hire inventory. These are suitable as a high powered speaker on stand system, or as a good compact stage monitor. They also dove-tail well as front fills for our GEO S12 systems.
The PS10R2 is a significant upgrade on the original PS10, itself an amazing compact speaker. They come as standard as left and right pairs, with integrated flying points for use with PS/GEO S12 rigging equipment. The NXAMP now contains DSP for the use of the speaker as a monitor as well as standard FOH duties. In common with the predecessor, the PS10R2 has a rotatable horn for FOH or monitor applications.
We've also added some more RS15 subs and S1210's to our stock of Nexo GEO S12 system. So in the week just ended we were able to service theatre venue seating 750 at one end of the country as well as a stand up hip-hop gig for 900 at the other.
We've also made the long-term rental of a second SC48 from SSE Audio permanent as well as adding some more SSE MB4 monitors to our existing inventory.
The PS10R2 is a significant upgrade on the original PS10, itself an amazing compact speaker. They come as standard as left and right pairs, with integrated flying points for use with PS/GEO S12 rigging equipment. The NXAMP now contains DSP for the use of the speaker as a monitor as well as standard FOH duties. In common with the predecessor, the PS10R2 has a rotatable horn for FOH or monitor applications.
We've also added some more RS15 subs and S1210's to our stock of Nexo GEO S12 system. So in the week just ended we were able to service theatre venue seating 750 at one end of the country as well as a stand up hip-hop gig for 900 at the other.
We've also made the long-term rental of a second SC48 from SSE Audio permanent as well as adding some more SSE MB4 monitors to our existing inventory.
0 Comments
Upgrading input modules (AI16) on an SC48
10/02/11 17:32 Filed in: Professional Audio
We noticed a slight noise issue with one of the preamps. Quick phone call to Digidesign and within 2 days they had sent over three entirely new AI16 input modules along with instructions on replacement. We set aside a full morning for the job, and started at 9am....
Remove 26 hex screws on the top panel and the top of the board lifts up on a hinge, revealing the brains.
After undoing the ribbon cable harnesses, you undo 2 thumb screws at the rear of the unit and the four screws on the front of the unit at the back of the board. Use a sharpie to mark the number and orientation of each ribbon cable. Time 9:10am...
Repeat for the other 2 input modules - a socket set is handy for getting into the hard to reach thumb screws lower down. Time 9:30am....
2 modules already fitted, 9:45am
Last module in, refit ribbon cables, following the marks we'd made with the sharpie earlier...
Top and the 26 hex screws replaced. Ready for testing 9:55am....
Remove 26 hex screws on the top panel and the top of the board lifts up on a hinge, revealing the brains.
After undoing the ribbon cable harnesses, you undo 2 thumb screws at the rear of the unit and the four screws on the front of the unit at the back of the board. Use a sharpie to mark the number and orientation of each ribbon cable. Time 9:10am...
Repeat for the other 2 input modules - a socket set is handy for getting into the hard to reach thumb screws lower down. Time 9:30am....
2 modules already fitted, 9:45am
Last module in, refit ribbon cables, following the marks we'd made with the sharpie earlier...
Top and the 26 hex screws replaced. Ready for testing 9:55am....
List Hire Prices
18/10/10 13:59 Filed in: General
I’ve noticed a few searches on our website for hire prices. Generally we don’t publish these prices as overall package prices vary with quantity, hire duration as well as the competitive discount structure we offer our long-term customers.
Below then is are the list prices for individual items in our inventory. All prices are Ex VAT of 21% and are prices for a one day hire.
For best prices, please call or email and ask for a quotation.
Speakers (Includes stands, rigging and cable as required)
Nexo RS15 €55
Nexo S1210/S1230 €55
Nexo PS10 €25
Nexo LS500 €25
SSE MB4 monitor €15
QSC K10 active speaker (2 mic/line input) €50
Amplifiers
NXAMP 4x4 €45
NXAMP 4x1 €35
Camco Vortex 4 €25
Consoles
Digidesign/Avid Venue SC48 €200.00
Yamaha LS9 16 €80.00
Microphones/DI Boxes (all include cable & stand as necessary)
Shure SM58/SM57 €5.00
Shure Beta 58/Beta 57 €7.50
Shure SM81 €10.00
Shure Beta 52 €7.50
Shure Beta 98 €15
AKG 214 €10
Sennheiser e604 €5
Sennheiser e904 €7.50
Sennheiser e906 €7.50
Sennheiser MD241 €10.00
Neumann KM184 €35.00
BSS AR133 Active DI Box €5.00
EMO Passive DI box €2.50
Wireless Microphone Systems
Sennheiser EW100 G3 with handheld or beltpack transmitter €35
Below then is are the list prices for individual items in our inventory. All prices are Ex VAT of 21% and are prices for a one day hire.
For best prices, please call or email and ask for a quotation.
Speakers (Includes stands, rigging and cable as required)
Nexo RS15 €55
Nexo S1210/S1230 €55
Nexo PS10 €25
Nexo LS500 €25
SSE MB4 monitor €15
QSC K10 active speaker (2 mic/line input) €50
Amplifiers
NXAMP 4x4 €45
NXAMP 4x1 €35
Camco Vortex 4 €25
Consoles
Digidesign/Avid Venue SC48 €200.00
Yamaha LS9 16 €80.00
Microphones/DI Boxes (all include cable & stand as necessary)
Shure SM58/SM57 €5.00
Shure Beta 58/Beta 57 €7.50
Shure SM81 €10.00
Shure Beta 52 €7.50
Shure Beta 98 €15
AKG 214 €10
Sennheiser e604 €5
Sennheiser e904 €7.50
Sennheiser e906 €7.50
Sennheiser MD241 €10.00
Neumann KM184 €35.00
BSS AR133 Active DI Box €5.00
EMO Passive DI box €2.50
Wireless Microphone Systems
Sennheiser EW100 G3 with handheld or beltpack transmitter €35